Home > Vehicle Network Interfaces >

neoVI RED
neoVI RED
 
Does not include Vehicle Spy license
One license required per neoVI
$1,195.00

Product Code: NEOVI-RED


The following items are included with this product:



Cable:
  

Qty:  
Description Specifications Manuals
 

neoVI RED: 2xCAN (1 selectable: DWCAN, SWCAN, LSFTCAN), 2xLIN

Multiple Protocol Tool to Support Vehicle Bus Needs of Today and Tomorrow

Intrepid Control Systems introduces neoVI RED, part of our growing line of vehicle network development tools. neoVI RED fills the need for multiple CAN and LIN channels. neoVI RED is a low cost, high value CAN and LIN bus interface that fits in your pocket.

Connect to Multiple CAN and LIN Busses Simultaneously
With its two CAN and two LIN channels, neoVI RED allows you to view message traffic on all four networks simultaneously. As multiple channels become standard, you can rely on neoVI RED, with its accuracy of 10 microseconds, to monitor CAN and LIN networks without missing a message.

Log Data to Internal Memory Card Without a PC
neoVI RED supports a MicroSD card for trouble-free datalogging. Now you can log data without your PC. First, setup neoVI RED including message filtering with Intrepid Control Systems’ Vehicle Spy software. Then disconnect from your PC and log vehicle network traffic until the card is full. neoVI RED supports logging on all networks simultaneously with no latency issues.

Embedded Scripting and Automation - Function Blocks
Easily setup automated scripts such as transmitting multiple messages at a given interval and much, much more using neoVI RED’s internal scripting engine. With Intrepid Control Systems’ Function Blocks, you can use an easy-to-use, mouse driven interface that creates simple yet powerful automated tasks embedded on the hardware itself.

neoVI is Designed for Automated Testing
neoVI RED has built-in support for automated testing. With built-in Function Blocks (automated scripting), neoVI RED supports scripts to operate without a PC. First, simply setup the neoVI RED using Intrepid Control Systems’ Vehicle Spy software. Then you can run the device in a stand-alone mode that will allow you to send and receive data as well as log data. neoVI RED is also equipped with generic IO that can be configured to trigger an external data acquisition system.

neoVI is a Smart Interface for Data Logger Applications
neoVI RED includes a MicroSD card slot for logging data directly to the device without a PC. Now you can setup the device to collect your LIN, CAN, or J1939 data directly onto storage media. Using the widely available MicroSD card, neoVI RED can send diagnostic requests and receive normal and diagnostic responses from your data network either connected to a PC for real-time data analysis or for stand-alone data logging. Its versatile design and full industrial temperature range allow neoVI RED to work in harsh environments without the need for constant interaction or constant PC connection.

neoVI is perfect as a front-end for a flight recorder or data logger. Each sub circuit on neoVI implements micro-amp power down modes. The device can wake up on activity of any network or connection of USB.

neoVI RED 25 Pin Connector

Pin
Description
Pin
Description
1
SW CAN
13
GND
2
N/A
14
HS CAN 1 H
3
LSFT CAN H
15
HS CAN 1 L
4
LSFT CAN L
16
HS CAN 2 H
5
MS CAN H
17
HS CAN 2 L
6
MS CAN L
18
Misc DIO 4
7
ISO L
19
HS CAN 3 H
8
ISO K / LIN 1
20
HSCAN 3 L
9
DBG CLK
21
TSYNC CLK H
10
Misc DIO 1
22
TSYNC CLK L
11
Misc DIO 2
23
Misc DIO 3
12
DBG DATA
24
DBG RESET
25
VBATT

neoVI RED 9 Pin Connector

Pin
Description
1
LIN 1
2
LIN 2
3
LIN 3
4
LIN 4
5
GND
6
MISC DIO 5
7
MISC DIO 6
8
NC
9
NC


Related Products
neoVI FIRE
$1,995.00
neoVI FIRE
neoVI RED Extended Warranty - 3 Years
$359.00
Vehicle Spy 3 Professional
$2,795.00
Vehicle Spy
neoVI MOTE
$495.00
neoVI MOTE