Home > Cables
Sort By:
Page of 3
neoVI FIRE 2 OBD Cable with Diagnostics over IP (DoIP) Support
neoVI FIRE 2 OBD Cable with Diagnostics over IP (DoIP) Support (HD-26F to DB-25M + DB-9M + OBD-II)
$35.00

Breaks out the HD-26F connector on the neoVI FIRE 2 into DB-25M, DB-9M and OBD-II (J1962) connectors. Suitable for gatewaying all traffic over pins 6 and 14 exclusively, or for use with Diagnostics over IP (DoIP).
neoVI FIRE 2 Ethernet Cable Adapter
neoVI FIRE 2 Ethernet Cable Adapter (HD-26F to DB-25M + DB-9M + RJ-45)
$45.00

Converts the HD-26F connector on the neoVI FIRE2 and FIRE2 VNET to DB-25M, DB-9 and RJ-45 (Ethernet) connectors.
RAD-Galaxy Ethernet Cable Adapter
RAD-Galaxy Ethernet Cable Adapter (HD-26F to HD-26M + DB-9M + RJ-45)
$45.00

Converts the HD-26F connector on the RAD-Galaxy to HD-26M, DB-9 and RJ-45 (Ethernet) connectors.
neoVI FIRE 2 µDB-9F to DB-9M Cable Adapter
neoVI FIRE 2 µDB-9F to DB-9M Cable Adapter
$35.00

Converts the male µDB-9 miscellaneous I/O connector on the neoVI FIRE 2 to a standard DB-9M connector.
neoVI-OBD-MULTI Cable (DB-25F to OBD-II)
neoVI-OBD-MULTI Cable (DB-25F to OBD-II)
$35.00

Converts the DB-25M connector on many Intrepid hardware devices to a standard OBD-II connector, with a pinout to meet the needs of most newer vehicles using multiple DW CAN channels.
neoVI-OBD-MULTI Cable (DB-25F to OBD-II) - Right Angle
neoVI-OBD-MULTI Cable (DB-25F to OBD-II) - Right Angle
$80.00

Converts the DB-25M connector on many Intrepid hardware devices to a right-angled OBD-II connector, with a pinout to meet the needs of most newer vehicles using multiple DW CAN channels.
neoVI-OBD-1 Cable (DB-25F to OBD-II)
neoVI-OBD-1 Cable (DB-25F to OBD-II)
$35.00

Adapts the DB-25M connector on many Intrepid hardware devices to a standard OBD-II connector with a pinout suitable for GM vehicles.
neoVI-OBD-CAN-1 Cable (DB-25F to OBD-II + DB-9F)
neoVI-OBD-CAN-1 Cable (DB-25F to OBD-II + DB-9F)
$125.00

Adapts the DB-25M connector on Intrepid hardware devices to a standard OBD-II connector with a pinout suitable for GM vehicles, as well as a separate DB-9 connector for attaching a separate CAN accessory.
OBD-II Y-Splitter Cable
OBD-II Y-Splitter Cable
$50.00

A "straight-through" Y-splitter to allow two OBD-II (J1962 OBD) tools to be connected to one vehicle at the same time.
neoVI HD-26F Breakout Cable (HD-26F to 14x DB-9M + 2x Banana Plugs)
neoVI HD-26F Breakout Cable (HD-26F to 14x DB-9M + 2x Banana Plugs)
$100.00

Breaks out the HD-26F connector on various neoVI hardware devices to 14 individual DB-9M connectors CAN, LIN and miscellaneous I/O, and two banana plugs for power.