OBSOLETE -- neoOBD2 Simulator
- This product is obsolete. Use the neoECU-10 and neoECU-12 for simulation tasks, or any device in the neoVI Family with CoreMini scripting support.
- Requires Vehicle Spy Professional or Enterprise license to program
This product is obsolete. Use the neoECU-10 and neoECU-12 for simulation tasks, or any device in the neoVI Family with CoreMini scripting support.
A low-cost CAN / CAN FD simulator for your desktop. designed for script-based simulations for interactive protocols such as ISO14229, CCP/XCP, J1939 and more. Uses Vehicle Spy 3 Professional or Enterprise for programming. CoreMini script is flashed via USB.
At a glance
- CompatibilityThis product is obsolete
- Key interfacesSee Specifications tab
- Included itemsNo bundled accessory list provided
- Lead timeCurrently Unavailable
- Country of originUS
This product is obsolete. Use the neoECU-10 and neoECU-12 for simulation tasks:
neoECU-10 Series:
- neoECU-10-HHL: https://store.intrepidcs.com/product/NEOECU-10-HHL
- neoECU-10-HLSL: https://store.intrepidcs.com/product/NEOECU-10-HLSL
You can also use virtually any neoVI or RAD Series product using its CoreMini Scripting capability:
Vehicle Network Adaptors: https://intrepidcs.com/products/vehicle-network-adapters/
Automotive Ethernet Tools: https://intrepidcs.com/products/automotive-ethernet-tools/
Data Loggers: https://intrepidcs.com/products/data-loggers/
Overview
The neoOBD2 Simulator is a low cost bus simulator with two CAN / CAN FD channels for your desktop. The simulator has been designed for CoreMini script-based simulations for interactive protocols such as ISO14229, CCP, XCP, or J1939.
It is easy to interact with your scripts by using the neoOBD2 Simulator’s four combination knobs/buttons and multi-color LEDs. Because it is equipped with a J1962 DLC connector and a Li-Ion battery, your vehicle network tools will connect to the simulator just like they do to your vehicle, and the neoOBD2 Simulator can independently power them.
The neoOBD2 Simulator also includes the NEOVI-PS power supply that allows you to power both your network tool and simulator right at your desk. Load new simulations as needed using Vehicle Spy Professional over USB-C.
neoOBD2 Simulator also comes with a 12x4 character OLED B/W LCD screen which is programmable through Vehicle Spy's Function Blocks for user feedback.
Custom Simulations with VEHICLE SPY
Use Vehicle Spy Professional or Enterprise software to create custom simulations that make the neoOBD2 Simulator act like your ECU, vehicle or industrial device. The CoreMini scripting engine has parallel logic, if-then, message transmission, message decoding, signal decoding and signal generation capabilities. Create custom simulations that make the neoOBD2 Simulator act like your ECU, an OBD port, a vehicle or industrial device.
- Gateway Node
- ECU Simulator
- Handheld DIY Service Tool
- Automated Vehicle Configuration
- ECU Replacement
- Two CAN / CAN FD channels
- Built in user-selectable termination
- Use CoreMini scripting engine to run standalone scripts
- 12x4 Character OLED Display
- Four programmable tri-color LEDs
- Four programmable 360 Degree Encoder with integrated pushbuttons
- Configure and charge via USB
- Built in 2000mAh Lithium-Ion battery
- J1962 DLC connector
- Includes AC power supply for bench/desktop use
| Harmonized Code | 9031808070 |
|---|---|
| ECCN | EAR99 |
| Unit of Measure | EA |
| Country of Origin | US |