RAD-IO2 CANFD Hub

The RAD-IO2-CANHUB is a CAN FD interface for the RAD-IO2 Series of Open I/O:

• CAN FD interface for RAD-IO2 (one channel CAN FD)
• Supports up to 3 to 4 RAD-IO2 modules depending on the use case
• Needed to interface RAD-IO2 devices to CAN bus
• Powered from VBAT input on DB9 connector
• CAN-HUB accepts 4.5VDC-40VDC
• Cable to power CAN-HUB and extend CAN to DB9 is optional (RAD-IO2-CH-PWRC)

Most DAQ applications tie you to a single toolchain or software. That results in less choice and higher prices. Many of us have often wanted hardware that expands beyond vehicle networks into digital I/O, analog I/O relays and other sensors. The RAD-IO2 Family is what you've been waiting for.

• Using the CANHub, it connects to your CAN or CAN FD vehicle network (or an unused network on any CAN/CAN FD device, such as a neoVI ION, neoVI Plasma, or neoVI Fire 2.)
• Connects directly to USB port on neoVI Fire 2 and neoVI ION
• Connect to Arduino with UART
• USB for direct connection to your computer (Mac, Linux, and Windows)

All RAD-IO2 Modules have the ability to stack, using an integrated "dovetail" notch. Stackable, Daisy-Chain Up To Five Modules with optional CAN-HUB; Two with FIRE2 or ION; PC-USB depends upon power limitation from the PC-USB

Product Family

• RAD-IO2-TC: 8 Isolated banks, each with 1 isolated channel of K-type thermocouple |  Buy RAD-IO2-TC
• RAD-IO2-AIN: 8 Isolated banks, 1 channel per bank selectable between a high or low voltage input | Buy RAD-IO2-AIN
• RAD-IO2-AOUT: 8 Isolated analog output banks, each with 3 analog outputs per bank  | Buy RAD-IO2-AOUT
• RAD-IO2-PWRRLY: 8 Isolated SPDT (single pole double throw) electro-mechanical relays | Buy RAD-IO2-PWRRLY
• RAD-IO2-DIO: 12 digital/analog inputs and 8 digital outputs | Buy RAD-IO2-DIO
• RAD-IO2-CANHUB: CAN interface for up to 4 RAD-IO2 devices | Buy RAD-IO2-CANHUB