Zoom
neoVI-OBD-MULTI Cable (DB-25F to OBD-II)
OBD Port to DB25F Cable (Multi Manufacturer - Many OEMs)
At a glance
- CompatibilityOBD Port to DB25F Cable (Multi Manufacturer - Many OEMs)
- Key interfacesSee Specifications tab
- Included itemsNo bundled accessory list provided
- Lead timeUsually Ships in 2 to 4 Weeks
- Country of originCN
Overview
This cable converts the DB-25M connector on many Intrepid hardware devices to a standard OBD-II connector. It differs from the NEOVI-OBD-1 in that its pinout matches the needs of most newer vehicles using multiple DW CAN channels.
OBD-II Connector Pinout (Vehicle Side View)
Connector Pinouts and Signal Mapping
| OBD-II Pin # | OBD-II Signal | DB-25F Signal | DB-25F Pin # |
|---|---|---|---|
| 1 | Discretionary* | HS CAN 3 H | 19 |
| 2 | SAE J1850 + | N/C | N/C |
| 3 | Discretionary* | MS CAN H | 5 |
| 4 | Chassis Ground | N/C | N/C |
| 5 | Signal Ground | PWR GND | 13 |
| 6 | CAN H (ISO15765-4 and SAE-J2284) | HS CAN 1 H | 14 |
| 7 | ISO9141/K | ISO9141/K/LIN1 | 8 |
| 8 | Discretionary* | N/C | N/C |
| 9 | Discretionary* | HS CAN 3 L | 20 |
| 10 | SAE J1850 - | N/C | N/C |
| 11 | Discretionary* | MS CAN L | 6 |
| 12 | Discretionary* | HS CAN 2 H | 16 |
| 13 | Discretionary* | HS CAN 2 L | 17 |
| 14 | CAN L (ISO15765-4 and SAE-J2284) | HS CAN 1 L | 15 |
| 15 | L line of ISO9141-2 | ISO L | 7 |
| 16 | Unswitched Vehicle Battery Positive | VBATT | 25 |
Note: The table above shows standard signals for the OBD-II connector; this includes J1850, which is not supported by current Intrepid hardware devices.
| Length | 7' (2.13 m) |
|---|---|
| Weight | 11 oz (317 g) |
No Manuals Provided
| Harmonized Code | 8544420000 |
|---|---|
| ECCN | EAR99 |
| Unit of Measure | EA |
| Country of Origin | CN |