Home > Cables >

AP1200A-MUL / neoVI-OBD-MULTI Cable (DB-25F to OBD-II)
neoVI-OBD-MULTI Cable (DB-25F to OBD-II)

Availability:: Usually Ships in 2 to 4 Weeks
Product Code: AP1200A-MUL

Description Specifications

This is the Keysight version of the NEOVI-OBD-MULTI cable. This is an OPTIONAL cable supplied as part of the Keysight AP1200-34500 KIT.


This cable converts the DB-25M connector on many Intrepid hardware devices to a standard OBD-II connector. It differs from the NEOVI-OBD-1 in that its pinout matches the needs of most newer vehicles using multiple DW CAN channels.

OBD-II Connector Pinout (Vehicle Side View)

OBD-II Vehicle Side Connector Pinout

Connector Pinouts and Signal Mapping

OBD-II Pin #
OBD-II Signal DB-25F Signal
DB-25F Pin #
1 Discretionary* HS CAN 3 H 19
2 SAE J1850 +
3 Discretionary* MS CAN H 5
4 Chassis Ground N/C N/C
5 Signal Ground PWR GND 13
6 CAN H (ISO15765-4 and SAE-J2284) HS CAN 1 H 14
7 ISO9141/K ISO9141/K/LIN1 8
8 Discretionary* N/C N/C
9 Discretionary* HS CAN 3 L 20
10 SAE J1850 -
11 Discretionary* MS CAN L 6
12 Discretionary* HS CAN 2 H 16
13 Discretionary* HS CAN 2 L 17
14 CAN L (ISO15765-4 and SAE-J2284) HS CAN 1 L 15
15 L line of ISO9141-2 ISO L 7
16 Unswitched Vehicle Battery Positive VBATT 25

Note: The table above shows standard signals for the OBD-II connector; this includes J1850, which is not supported by current Intrepid hardware devices.

Related Products