Home > All Products >

RAD-IO2 Isolated Thermocouple Module
RAD-IO2 Isolated Thermocouple Module
 
Alternative Views:


$695.00

Availability:: Pre-Order: This item will be released on July 31st, 2019
Product Code: RAD-IO2-TC
Qty:

Description Specifications Manuals
 
RAD IO 2 Open I/O Thermocouple Module

The RADIO2-TC Module has:

  • 8 banks of isolated K-type thermocouple interface; One channel per bank
  • 0.2°C resolution
  • Cold junction accuracy +/-0.5C (0C to 70C) +/- 1.0C (-40 to 125C).
  • 60Hz and 50Hz Common mode rejection > 105dB
  • Standard MiniTC connector
  • Second order 150Hz filter

An Open I/O Concept - Use CAN, USB, or Arduino for DAQ


Most DAQ applications tie you to a single toolchain or software. That results in less choice and higher prices. Many of us have often wanted hardware that expands beyond vehicle networks into digital I/O, analog I/O relays and other sensors. The RAD-IO2 Family is what you've been waiting for.

Intrepid's RAD-IO2 devices connect in three ways:

  • Using the CANHub, it connects to your CAN or CAN FD vehicle network (or an unused network on any CAN/CAN FD device, such as a neoVI ION, neoVI Plasma, or neoVI Fire 2.)
  • Connects directly to USB port on neoVI Fire 2 and neoVI ION
  • Connect to Arduino with UART
  • USB for direct connection to your PC and Vehicle Spy.
Stackable and Daisy-Chain

All RAD-IO2 Modules have the ability to stack, using an integrated "dovetail" notch. Stackable, Daisy-Chain Up To Five Modules with optional CAN-HUB; Two with FIRE2 or ION; PC-USB depends upon power limitation from the PC-USB