Home > All Products >

RAD IO 2 Open I/O Thermocouple Module
RADIO2-TC Open I/O Thermocouple Module
Alternative Views:


Availability:: Pre-Order: This item will be released on July 31st, 2019
Product Code: RAD-IO2-TC

Description Specifications Manuals
RAD IO 2 Open I/O Thermocouple Module

The RADIO2-TC Module has:

  • 8 channels of Type-K thermocouples
  • 16-bit ADC
  • 0.2°C Resolution
  • Cold junction accuracy +/-0.5C (0C to 70C) +/- 1.0C (-40 to 125C).
  • 60Hz and 50Hz Common mode rejection > 105dB
  • 2.5kV channel-to-channel isolation

An Open I/O Concept - Use CAN, USB, or Arduino for DAQ

Most DAQ applications tie you to a single toolchain or software. That results in less choice and higher prices. Many of us have often wanted hardware that expands beyond vehicle networks into digital I/O, analog I/O relays and other sensors. The RAD IO 2 Family is what you've been waiting for.

Intrepid's RAD IO 2 devices connects in three ways:

  • Using the CANHub, it connects to your CAN or CAN FD vehicle network (or an unused network on any CAN/CAN FD device, such as a neoVI ION, neoVI Plasma, or
    neoVI Fire 2.)
  • RS-232 for use with Arduino
  • USB for direct connection to your PC and Vehicle Spy.
Stackable, Daisy-Chain Up To Eight Modules

All RAD-IO2 Modules have the ability to stack, using an integrated "dovetail" notch. Up to 8 RAD-IO2 Modules can be daisy-chained together for use at once, only needing a single connection to your PC or device.