Home > Cables >

neoVI-OBD-CAN-1 Cable (DB-25F to OBD-II + DB-9F)
neoVI-OBD-CAN-1 Cable (DB-25F to OBD-II + DB-9F)
 
$125.00

Product Code: NEOVI-OBD-CAN-1
Qty:

Description Specifications
 

Overview

This cable adapts the DB-25M connector on Intrepid hardware devices to a standard OBD-II connector as well as a separate DB-9 connector. The OBD pinout differs from that of the NEOVI-OBD-MULTI, and is well-suited to GM vehicles. The DB-9F connector can be used to connect a separate CAN accessory at the same time, for applications such as data acquisition.

A special version of this cable for RAD-Star firmware flashing is also available.

Connector Pinouts and Signal Mapping

OBD-II Pin # OBD-II Signal DB-25F Signal DB-25F Pin # DB-9F Signal DB-9F Pin #
1 Discretionary* (GMLAN SW CAN) SW CAN 1
2 SAE J1850 + N/C N/C
3 Discretionary* (GMLAN MS CAN H) MS CAN H 5
4 Chassis Ground N/C N/C
5 Signal Ground PWR GND 13 PWR GND
3
6 Discretionary* (GMLAN HS CAN H) HS CAN 1 H 14
7 ISO9141/K ISO9141/K/LIN1 8
8 Discretionary* N/C N/C
9 Discretionary* (GM ALDL) HS CAN 3 H 19
10 SAE J1850 - HS CAN 3 L 20
11 Discretionary* (GMLAN MS CAN L) MS CAN L 6
12 Discretionary* HS CAN 2 H 16
13 Discretionary* HS CAN 2 L 17
14 Discretionary* (GMLAN HS CAN L) HS CAN 1 L 15
15 L line of ISO 9141-2 ISO L 7
16 Unswitched Vehicle Battery Positive VBATT 25 VBATT
9

MISC DIO 1
10 MISC DIO 1
1

HS CAN 3 L
20 HS CAN 3 L
2

TSYNC CLK L
22 TSYNC CLK L
4

MISC DIO 3
23
MISC DIO 3
6

HS CAN 3 H
19 HS CAN 3 H
7

TSYNC CLK H
21 TSYNC CLK H
8

Note: The table above shows standard signals for the OBD-II connector; this includes J1850, which is not supported by current Intrepid hardware devices.


Related Products
neoVI FIRE Extended Warranty - 3 Years
$599.00
neoVI RED
$1,195.00
neoVI RED
neoVI FIRE
$1,995.00
neoVI FIRE